gas properties in AVL Fire

January 19, 2009, 08:18

Hi everybody,

I am using AVL Fire 8.52 to simulate high temperature( around 1000k) supersonic flow. My question is whether the solver will calculate the values of specific heat, thermal conductivity, viscosity of air for high temperature or I need to input the formulas for the variation of gas properties with temperature in the fluid properties window? Any help would be greatly appreciated.

Morshed

mohsenfjs · August 24, 2010, 15:47

hi

i'm doing some simulations in the same field as you do so if you are interested to share ideas over this send me an email on mohsen1_khalafi@yahoo.com

thanks a lot

January 19, 2009, 08:18	gas properties in AVL Fire	#1
Morshed Alam Guest Posts: n/a	Hi everybody, I am using AVL Fire 8.52 to simulate high temperature( around 1000k) supersonic flow. My question is whether the solver will calculate the values of specific heat, thermal conductivity, viscosity of air for high temperature or I need to input the formulas for the variation of gas properties with temperature in the fluid properties window? Any help would be greatly appreciated. Morshed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 05:21
Constant velocity of the material	Sas	CFX	15	July 13, 2010 08:56
AVL FIRE; Problem in modeling gas spray	doki	Main CFD Forum	7	July 8, 2010 09:01
Two-Phase Buoyant Flow Issue	Miguel Baritto	CFX	4	August 31, 2006 12:02
Gas pressure question	Dan Moskal	Main CFD Forum	0	October 24, 2002 22:02

August 24, 2010, 15:47		#2
mohsenfjs New Member Mohsen Khalafi Join Date: May 2010 Posts: 5 Rep Power: 15	hi i'm doing some simulations in the same field as you do so if you are interested to share ideas over this send me an email on mohsen1_khalafi@yahoo.com thanks a lot