CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Main CFD Forum (https://www.cfd-online.com/Forums/main/)
-   -   exact solution to axi stokes pipe found? (https://www.cfd-online.com/Forums/main/8841-exact-solution-axi-stokes-pipe-found.html)

kenn March 11, 2005 16:02

exact solution to axi stokes pipe found?
 
Hi, is the exact solution to axisymmetric stokes flows (steady and incompressible) in pipe found?

if yes, what's it, or where to find it?

thanks a lot

Tom March 14, 2005 05:15

Re: exact solution to axi stokes pipe found?
 
In any text book on fluid mechanics - the solutions a parabola just as in the cartaesian channel case.

If you're feeling adventurous you can also write down the unsteady solution for this problem.

kenn March 14, 2005 12:24

in non fully developed region
 
thanks a lot, but I meant the solution in non-fully developed region; suppose the inform inflow is uniform.

Tom March 15, 2005 05:06

Re: in non fully developed region
 
It depends on the boundary conditions and what you assume. For general boundary conditions the answer is NO since you'll need to solve the fully nonlinear equations analytically. If your inflow profile matches the fully devolped profile and you have Neumann conditions at the outlet then the anylitic solution is the fully developed solution everywhere.

Special cases with the Reynolds number (R) <<1 and >>1 are possible. You could also get somewhere with the case where the inflow differs from the fully developed profile by a small amout (or even mixtures of these three cases).


All times are GMT -4. The time now is 17:42.