CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Mesh genaration

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 16, 2005, 03:09
Default Mesh genaration
  #1
Karthik
Guest
 
Posts: n/a
Dear friends,

I am at present working on the mesh generation in a casting component for CFD analysis. The casting component is quite intricate and also complex in such a way that, given a mesh size for the whole component, mesh generation cannot be done in one single go.I used a mesh genartion software named GAMBIT.

Can any high end mesh generation softwares (ANSYS/HYPERMESH/PATRAN/NASTRAN/PRO-E/CATIA)can help me in this case to do mesh generation in one single go, so that I can use the mesh for analysis part.

I have heard that HYPERMESH / ANSYS are good structural analysis softwares. Can HYPERMESH generate mesh inside any model for doing CFD analysis? ( solid mesh).

Any info regarding this problem will help me a lot.

Thanks in Advance friends.

Karthik
  Reply With Quote

Old   March 18, 2005, 14:18
Default Re: Mesh genaration
  #2
Sandip N. Jadhav
Guest
 
Posts: n/a
Hi, Have a look at grid generator developed by IITZeus group @IITB. (Commerical operated as Zeus Numerix)

http://www.aero.iitb.ac.in/~iitzeus

This grid generator have in built full fledge Geometric Modeller and CAD interfaces. Complex geometries can discritised in short period of time using this software.

It has both 3D mutilbock structure grid generation and 3D unstructure grid generation capabilities. Also lots of option for grid clustering, quality, smoothing etc which are essential for CFD simulations are avaliable.

Regards, sandip

-- http://www.aero.iitb.ac.in/userpages/sandipj

  Reply With Quote

Old   March 21, 2005, 01:22
Default Re: Mesh genaration
  #3
Karthik
Guest
 
Posts: n/a
Thanks Sandip

Your products and its informations were useful.

Karthik
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] surface mesh merging problem everest ANSYS Meshing & Geometry 39 June 5, 2013 19:02
Converting Starccm+ mesh Ladnam OpenFOAM 0 September 14, 2011 06:30
Meshing aifoil in ICEM student123a ANSYS Meshing & Geometry 13 December 8, 2010 11:40
2d irregular grid Remy Main CFD Forum 1 December 22, 2008 05:49
basic of mesh refinement arya CFX 4 June 19, 2007 12:21


All times are GMT -4. The time now is 19:14.