CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Main CFD Forum (https://www.cfd-online.com/Forums/main/)
-   -   Problem using EDM for combustion (https://www.cfd-online.com/Forums/main/88905-problem-using-edm-combustion.html)

nakul May 30, 2011 06:40

Problem using EDM for combustion
 
Hi,

I am trying to simulate combustion in a cylindrical pipe using Eddy Dissipation Model. At the inlet and outlet of the pipe I have made "far-field" domains as the flow around the inlet and outlet is also important.

The boundaries of "far-field" are assigned with ambient pressure and temperature and zero velocity.

In this setup, I am not being able to initiate combustion. I have solved the flow-field (cold flow analysis) but when I switch ON the reaction, no product formation occurs.

I am simulating a completely unsteady problem. I think there is some problem with EDM setup as I got acceptable flow-field from cold flow simulation.

Please Help.

Nakul


All times are GMT -4. The time now is 02:30.