CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   CFX Meshing Error! (http://www.cfd-online.com/Forums/main/8958-cfx-meshing-error.html)

C Mc Guinness April 3, 2005 13:20

CFX Meshing Error!
 
Dear All,

Can't mesh due to the following error.

"Problem: Topology error detected in CAD model.

CAD edge referenced 1 times by faces. Result: Model invalid for meshing. Cause: Invalid model. Action: Please refer to the user documentation for

topological limitations, and modify the

model accordingly. (Part, Body, Edge) = (3, 1, 7)"

Have taken Hull-form of a trawler via IGES file from Maxsurf, to ProEng in order to set up the Fluid Domain for flow analysis in CFX etc.But it doesn't seen to like any of the edges and therefore won't Mesh.! I've tried various methods via SolidWorks, parasolid file type and many others, with no success.

Any hints, tips or possible solutions would be great . ..

Regards

C McGuinness (University of Plymouth)


All times are GMT -4. The time now is 09:50.