CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

turbulent jet impinging on edge.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 27, 2011, 14:18
Default turbulent jet impinging on edge.
  #1
Member
 
Casey
Join Date: Jun 2009
Posts: 98
Rep Power: 16
meangreen is on a distinguished road
Has anyone simulated a turbulent jet impining on to an edge. i have tried to attach a image of the type of geometry. Basically there is a jet that forms from fully developed pipe flow that expands into the atmostphere. A few inches below the exit of the pipe is a wall. The wall has a slight bevel (kind of like a knife) and the edge of the bevel is centered below the pipe. I am having convergence issues with this simulation. Has anyone had problems with this? I am running fluent, but I am wondering if there are turbulence model issues that I am not including. The turbulence model I am running is reynolds stress model with quadratic pressure strain assumption. The mesh is 2D. Thanks,
Casey

meangreen is offline   Reply With Quote

Old   June 27, 2011, 14:20
Default
  #2
Member
 
Casey
Join Date: Jun 2009
Posts: 98
Rep Power: 16
meangreen is on a distinguished road
meangreen is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Confined Impinging Jet Geometry furley2372 Main CFD Forum 0 May 31, 2011 21:18
Problem in Turbulent modeling of impinging slot jet amirbabak1979 Main CFD Forum 5 October 29, 2009 22:00
How to design an impinging turbulent jet Pierre Siemens 1 January 9, 2009 12:48
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
IMPINGING JET ........... HELP!!!!!!!! Amir Omoumi Main CFD Forum 10 August 30, 1999 23:11


All times are GMT -4. The time now is 17:56.