Noise predictions simulations ?

June 11, 1999, 05:44

I am interested in noise predictions modelisation software.

I am working with Fluent in the domestic burner combustion area. Our goal is to reduce the noise of the burner device (air blowed burner --> fan)? Is that possible with Fluent ? or an other software ?

Thanks,

D. Surdyk

June 18, 1999, 11:20

I need more information on this. There are two ways to solve this problem (1) Direct simulation (2) Modeling. I prefer the second approach.Basically you need to compute the pressure fluctuations in the flow.

S. parameswaran Associate Professor Dept. of Mechanical Engineering Texas Tech University Lubbock, TX 79409

June 11, 1999, 05:44	Noise predictions simulations ?	#1
D. Surdyk Guest Posts: n/a	I am interested in noise predictions modelisation software. I am working with Fluent in the domestic burner combustion area. Our goal is to reduce the noise of the burner device (air blowed burner --> fan)? Is that possible with Fluent ? or an other software ? Thanks, D. Surdyk

June 18, 1999, 11:20	Re: Noise predictions simulations ?	#2
S. Parameswaran Guest Posts: n/a	I need more information on this. There are two ways to solve this problem (1) Direct simulation (2) Modeling. I prefer the second approach.Basically you need to compute the pressure fluctuations in the flow. S. parameswaran Associate Professor Dept. of Mechanical Engineering Texas Tech University Lubbock, TX 79409

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hardware selection for steady/unsteady incompressible, turbulent and cht simulations	maddalena	OpenFOAM	2	July 13, 2011 08:55
Boundary Layer Noise Source Model	Andrew	FLUENT	0	January 12, 2009 22:47
Turbo noise macro	Barri	CFX	0	May 21, 2008 09:26
URANS and Transient Simulations	bob	Main CFD Forum	0	October 1, 2003 03:54
Noise	Heinz Wilkening	Main CFD Forum	13	January 19, 2000 05:22