CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Validation of pressure/tempature with measured pre

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 17, 2005, 06:24
Default Validation of pressure/tempature with measured pre
  #1
MH Kim
Guest
 
Posts: n/a
I am doing the CFD work for exhaust receiver(similar to exhaust manifold) of 2-stroke large engine and I have to validate the calculated pressure/temperature at several monitoring locations with measured pressure/temperature from sensor.

The validation includes both cycle average value of pressure/temperature and pressure trace.

Due to the inconsistency between CFD and measurement method, I am thinking there should be a kind of special treatment to compare them.

Therefore, I'd like to get some guide for validation of pressure/temperature.

For example, use of mass weighted averaged pressure/temperature instead of direct comparison of calculated pressure/temperature.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Validation test for 2d euler equations in subsonic regime with canonical squares panou Main CFD Forum 2 August 24, 2011 16:21
Comparing measured values with LES results N. A. OpenFOAM 3 June 27, 2011 08:05
Validation of Star CCM+ iand Siemens 2 December 8, 2010 07:59
measured pressure in the discharge pipe jumps Jan Main CFD Forum 1 October 30, 2006 08:54
Urgent: RAE 2822 validation NID Main CFD Forum 0 September 3, 2004 11:34


All times are GMT -4. The time now is 06:54.