CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Forced heat transfer model (http://www.cfd-online.com/Forums/main/92432-forced-heat-transfer-model.html)

srinivasa September 14, 2011 06:38

Forced heat transfer model
 
Hello...
I am modelling a forced heat transfer model in Mcc(Motor Control Centre) which is in rectangular shape in fluent. It has inlet at bootom at the top there are fans of 700 cfm. in rectangular box there are bus bars which are generating heat flux. i meshed this model in gambit with nearly 8 lakh elements. Firstly i am starting with momentum and continuity eqn . when i am strating with energy eqn the contuinuity and momentum residuals are suddenly rising there after they are not decreasing... Can any one please suggest me out is to be modeled

mettler September 14, 2011 08:55

I have found that the residuals will rise when your mesh is not done well. Work on the mesh.

srinivasa September 15, 2011 01:24

Forced convection heat transfer
 
Thanks .. but i have done very good mesh.. the rectangular box of size 90*30 inches contain nearly 14 lakh elements.. and gambit showing there are no skewness in it ..


All times are GMT -4. The time now is 03:53.