Any one send me a 2D FVM code that is easy to read?

gchnhn · September 27, 2011, 13:26

Hello, every CFD lovers,

I am a postgraduate student major in Microwave Engineering/CEM. But my supervisor force me to complete a CFD code which is used in his project. To be honest, I have no interest in CFD at all, I love designing Microwave/RF circuits. But I have to finish the work----completely from 0----to get my degree. So I turn to you guys.

I have found NSC2KE and another similar code from the web. However, both are Node-Centered and I feel hard to understand either of them. So, can any of you kind enough to send me another 2D fvm Euler and/or NS code that uses unstructured mesh(triangle, tetra), cell-centered and easy clear to understand? I can't read C++, so it is better in fortran or C form. Code with detailed formulas is better, with 3D version is the best!

gchnhn@gmail.com

I hope you can stand in my shoe and help me!
Thanks!

DoHander · September 27, 2011, 14:41

Try the book of Blazek about CFD, it has a cell centered FVM Fortran code on the accompanying CD-ROM. Also, the book will presents you with the necessary theory to understand the code...

gchnhn · September 28, 2011, 02:56

Quote:

Originally Posted by DoHander

Try the book of Blazek about CFD, it has a cell centered FVM Fortran code on the accompanying CD-ROM. Also, the book will presents you with the necessary theory to understand the code...

I have found the pdf book, but don't know where to download the code...

gchnhn · September 28, 2011, 05:36

Thanks DoHander
I have got the code.
I will try read it tonight!

gchnhn · October 9, 2011, 11:59

I have got the code and the book
but the code is also median vertex-centered......

VincentD · October 10, 2011, 15:43

I actually posted a Matlab code (2D NS) in a thread (Matlab code for pipe flow). You might want to look it up (your university is bound to have licences for Matlab). Be sure to check the .pdf that explains the code and our discussion (also in that thread).

Note that having the code is just half of the work

Good luck finishing your project!

Vincent

haroon · March 8, 2013, 22:15

hello
i am new in cfd field. can anyone provide some simple code in fortran using FVM, for solving heat transfer problems.
thanks
haroonbashir13@hotmail.com

dokeun · March 10, 2013, 23:28

http://www.cfdbooks.com/cfdcodes.html

there is a 2d fvm node centered code and other usefull subroutines.

haroon · March 11, 2013, 00:23

thanks dokeun. I am greatful indeed.

yagizb · December 25, 2015, 03:29

Hi DoHander,
Could you provide me blazek codes,
thank you.

September 27, 2011, 13:26	Any one send me a 2D FVM code that is easy to read?	#1
gchnhn New Member Guo Qinghua Join Date: Sep 2011 Location: Nanjing Posts: 10 Rep Power: 14	Hello, every CFD lovers, I am a postgraduate student major in Microwave Engineering/CEM. But my supervisor force me to complete a CFD code which is used in his project. To be honest, I have no interest in CFD at all, I love designing Microwave/RF circuits. But I have to finish the work----completely from 0----to get my degree. So I turn to you guys. I have found NSC2KE and another similar code from the web. However, both are Node-Centered and I feel hard to understand either of them. So, can any of you kind enough to send me another 2D fvm Euler and/or NS code that uses unstructured mesh(triangle, tetra), cell-centered and easy clear to understand? I can't read C++, so it is better in fortran or C form. Code with detailed formulas is better, with 3D version is the best! gchnhn@gmail.com I hope you can stand in my shoe and help me! Thanks!

September 27, 2011, 14:41		#2
DoHander Senior Member Join Date: Nov 2009 Posts: 411 Rep Power: 19	Try the book of Blazek about CFD, it has a cell centered FVM Fortran code on the accompanying CD-ROM. Also, the book will presents you with the necessary theory to understand the code... chaitanyaarige and hamed8722 like this.

March 8, 2013, 22:15	Fortran code for FVM	#7
haroon New Member haroon Join Date: Mar 2013 Posts: 2 Rep Power: 0	hello i am new in cfd field. can anyone provide some simple code in fortran using FVM, for solving heat transfer problems. thanks haroonbashir13@hotmail.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Phase locked average in run time	panara	OpenFOAM	2	February 20, 2008 14:37
State of the art in CFD technology	Juan Carlos GARCIA SALAS	Main CFD Forum	39	November 1, 1999 14:34
Use of an hydrodynamic model integrated in the vertical by the PHOENICS code	Hafsia Zouhaier	Main CFD Forum	2	March 15, 1999 08:23
public CFD Code development	Heinz Wilkening	Main CFD Forum	38	March 5, 1999 11:44
What kind of Cmmercial CFD code you feel well?	Lans	Main CFD Forum	13	October 27, 1998 10:20

September 28, 2011, 05:36		#4
gchnhn New Member Guo Qinghua Join Date: Sep 2011 Location: Nanjing Posts: 10 Rep Power: 14	Thanks DoHander I have got the code. I will try read it tonight!

October 9, 2011, 11:59		#5
gchnhn New Member Guo Qinghua Join Date: Sep 2011 Location: Nanjing Posts: 10 Rep Power: 14	I have got the code and the book but the code is also median vertex-centered......

October 10, 2011, 15:43		#6
VincentD New Member Vincent Join Date: Jul 2011 Posts: 29 Rep Power: 14	I actually posted a Matlab code (2D NS) in a thread (Matlab code for pipe flow). You might want to look it up (your university is bound to have licences for Matlab). Be sure to check the .pdf that explains the code and our discussion (also in that thread). Note that having the code is just half of the work Good luck finishing your project! Vincent

March 10, 2013, 23:28		#8
dokeun Member Dokeun, Hwang Join Date: Apr 2010 Location: Korea, Republic of Posts: 98 Rep Power: 16	http://www.cfdbooks.com/cfdcodes.html there is a 2d fvm node centered code and other usefull subroutines.

March 11, 2013, 00:23		#9
haroon New Member haroon Join Date: Mar 2013 Posts: 2 Rep Power: 0	thanks dokeun. I am greatful indeed.

December 25, 2015, 03:29		#10
yagizb New Member yagizb Join Date: Mar 2011 Posts: 7 Rep Power: 15	Hi DoHander, Could you provide me blazek codes, thank you.