CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   ASMO model car (http://www.cfd-online.com/Forums/main/93063-asmo-model-car.html)

longamon October 4, 2011 07:16

ASMO model car
 
Hi all

I'm looking for the ASMO model car geometry, but can't seem to find it. Does any one now qhere I can get it?

any help would be much appreciated.

David

Far October 5, 2011 11:03

i can give you the bugati cad model

longamon October 5, 2011 11:07

sure, it'll be much appreciated, although I found the ASMO geometry, I'll post it when I convert it to stl.
my email is longamon@gmail.com

Far October 5, 2011 12:56

File size is about 40 MB so cant be linked here. please go to following link
http://grabcad.com/library/bugatti-veyron

Following link may also be useful for you.
http://www.3dcadbrowser.com/preview.aspx?modelcode=7428

vikramsngh October 25, 2011 11:37

Can you possibly send me the stl file? It would be much appreciated.
My email address is vs.vikramsngh91@gmail.com.

Far October 25, 2011 11:41

Not possible, as the file size is 40 MB. Gmail limit is 10 MB

vikramsngh October 25, 2011 11:48

Sorry for that. I meant the ASMO model car. Thanks anyway. Though there is one question I wanted to ask, I cant get the model of the Bugatti Veyron to become a complete solid There's always a problem of some surfaces not properly sewing or knitting with each other. There's no solid to subtract. Have you tried it? If so, can you please help?

longamon October 26, 2011 07:02

sent, hope it helps.

vikramsngh October 26, 2011 07:47

It does. Thanks. There's a question though. How do i proceed with an stl file? Because ANSYS design modeler does not import stl files. Before, I converted an stl file into a solid in sat format (using Mesh to Solid). But when i imported the sat file into ANSYS, it just stopped.

longamon October 26, 2011 08:55

I use ICEM and OpenFoam, they both handle STL files. I suppose ANSYS design modeler supports tin files, I just sent it.

vikramsngh October 30, 2011 03:40

There's a problem with the files you sent me. Seem to be beyond repair in ICEM CFD. I tried to mesh the surface ( and repair) and then extract curves, but it doesnt give the right result. Plus, the mesh shows a lot of errors.

pitpat231 November 14, 2011 12:38

Quote:

Originally Posted by longamon (Post 329510)
sent, hope it helps.

pls kindly send the ASMO model car to my mail.
patrickokolo231@gmail.com

vivekv8 April 24, 2014 08:13

Can you please send me the stl file at ed11b040@gmail.com

vivekv8 June 21, 2014 00:37

ASMO car body
 
I have the ASMO car body in .stl and .sldprt formats. Email me at ed11b040@gmail.com for the files.

shinde.gopal February 10, 2015 05:27

Looking for ASMO and SAE car body
 
Hi All,

I am looking for ASMO and SAE car body (iges or stl) in the cfd community.
If anybody has it please share it with me. Looking forward for a positive reply / help.
Thanks a lot.

Gopal.:)


All times are GMT -4. The time now is 22:07.