CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   star design - to model heat transfer (http://www.cfd-online.com/Forums/main/94285-star-design-model-heat-transfer.html)

gagi November 11, 2011 02:41

star design - to model heat transfer
 
hi

im new to CFD and as i experience convergence problems in my mesh (designed using solid works and prosurf and proamm and exported to pro star), i redesigned my mesh in star design and it get converged in star design and later i export it to pro star by enabling "start pro star gui". then i tried to change the properties of the material (temperature, viscosity and density as function of time etc..) and run the .mdl file again, but once post processed, i noticed the material properties havent been changed and it remains in initial valued i entered in star design.

is it possible for us to change the parameters in pro star .mdl file which is originally generated in star design?.
can i model conduction and radiation heat transfer after getting the .mdl file and changing the parameters in pro star user guide pannel?

(i ddnt follow the standard procdure, star design -> .dbs in pro surf -> pro amm -> pro star )


All times are GMT -4. The time now is 13:54.