CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Flotherm Simulation on IC devices

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 20, 2005, 04:41
Default Flotherm Simulation on IC devices
  #1
Klaus Ong
Guest
 
Posts: n/a
Hi... People use a lot of IC devices in electronics products'design. Of course the thermal managemnt such as heat sink attached with fan is needed to cool the IC devices, and this thermal solution can be designed by using Flotherm simulation software. However, most of the IC devices's manufacturers do not want to give the details of the internal contruction(dimensions) of the IC devices such as TO220 etc, with the reason is this information is proprietary. And we all know that Flopack can be used to create IC devices based on the outline of the IC devices ONLY and then the model can be used to perform the simulation, however, we still do not know the internal contruction of the IC devices(TO220) as most of the time we just estimate the dimensions only such as the die, die flag, lead, etc. Is there any method to get the actual dimensions for the internal construction of TO220 package? Or how to do the simulation in Flotherm if I do not have the information of the internal construction of the IC devices? Or anyone has the Delphi compact model for TO220? Thanks

regards, klaus
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Solar Radiation in OpenFOAM plainstyle OpenFOAM Running, Solving & CFD 15 July 8, 2014 05:43
Simulation of a complex wing in solidworks flow simulation niels1900 FloEFD, FloWorks & FloTHERM 6 April 20, 2011 11:44
GUI crash and simulation engine still running RPJones FLOW-3D 2 November 9, 2010 09:18
velocity profile export from a simulation onto another sudhirlv STAR-CCM+ 1 September 12, 2010 19:57
strange simulation error Ralf Schmidt FLUENT 2 May 4, 2007 14:02


All times are GMT -4. The time now is 16:36.