|
[Sponsors] |
April 17, 2018, 00:23 |
surface - dam free
|
#1 |
New Member
GA
Join Date: Apr 2018
Posts: 1
Rep Power: 0 |
I'm trying to quantify the test results on the flow in the right rectangle rectangle in straight open channel. Besides the cleavage geometry and the bottom (depth, width, height of the crest), the only parameter I know is the Froude number and depth of flow at the head of the dam.
At the entrance, I tried the wind speed with depth and velocity upstream corresponding to Froude number, volume 1 (water alone). However, the depth of the flow decreases dramatically at the time of flow through the dam. Please let me know what I am missing here. How to model Froude number and flow depth together? I have used the Eulerian multiphase model, the VOF model, the epsilon k model, the gravity model. https://www.google.com.vn/ |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cluster ID's not contiguous in compute-nodes domain. ??? | Shogan | FLUENT | 1 | May 28, 2014 15:03 |
free surface problem with capillary effect | rabbitmelon | CFX | 25 | August 16, 2013 03:05 |
[snappyHexMesh] Layers don't fully surround surface | EVBUCF | OpenFOAM Meshing & Mesh Conversion | 14 | August 20, 2012 04:31 |
Free surface is below than expected..results are not good | mechovator | CFX | 24 | April 8, 2011 00:41 |
Multiphase flow. Dispersed and free surface model | Luis | CFX | 8 | May 29, 2007 18:13 |