CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Typical runtime for simulation with mesh movement?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 17, 2005, 10:46
Default Typical runtime for simulation with mesh movement?
  #1
quarkz
Guest
 
Posts: n/a
hi,

I've read quite a few papers which simulate wings of insect (3d) or airfoil (2d) flapping. The Re should be 10^3 - 10^4. Does anyone knows what's the typical run time for 1 or 2 cycles, assuming using the university's super computing facilities? Does it need to take months?

thanks alot!
  Reply With Quote

Old   August 22, 2005, 08:13
Default Re: Typical runtime for simulation with mesh movem
  #2
Suriyanarayanan
Guest
 
Posts: n/a
Hi,

It depends not only on the facilties but also on the procedure that you would be using to compute the unsteady aerodynamics. I am not sure about the 3D case but i am able to get solutions for typical 2D problems in a time of 1-2 hrs.

Suriya
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Negative volume error in hybrid mesh siw ANSYS Meshing & Geometry 4 September 3, 2014 06:25
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation tommymoose ANSYS Meshing & Geometry 48 April 15, 2013 05:24
engrid -> save as .stl with boundarie codes Zymon enGrid 31 August 29, 2011 14:40
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
unstructured vs. structured grids Frank Muldoon Main CFD Forum 1 January 5, 1999 11:09


All times are GMT -4. The time now is 10:09.