|
[Sponsors] |
April 22, 2011, 09:31 |
Energy balance (buoyancy)
|
#1 |
New Member
antonin malinio
Join Date: Mar 2011
Posts: 4
Rep Power: 15 |
Good day everyone.
I have a question. I am creating a "chimney effect" in switchgear by Fluent buoyancy driven flow. Menu Report/fluxes shows this energy balance: Wall_Heat_Flux +160 W Convection -12 W Pressure_Out_Flow -120 W Pressure_In_Flow -28 W (!!!!) Problem is in the Pressure_In_Flow. Is possible the value MINUS 28 W, when logically there is only a flow into the chimney but Report says that there is 28 W out of system. Thanks for answers;-) Last edited by antonio22; April 22, 2011 at 17:06. |
|
April 22, 2011, 09:34 |
|
#2 |
New Member
antonin malinio
Join Date: Mar 2011
Posts: 4
Rep Power: 15 |
Do you have any explanation?
Last edited by antonio22; April 22, 2011 at 17:03. |
|
February 17, 2012, 11:43 |
|
#3 |
New Member
guru
Join Date: Jan 2012
Posts: 9
Rep Power: 14 |
dear antonio can i have your case study for studying as i am a student working on temperature rise test in busbar in fluent...
will you be able to help me.. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Energy balance error with high prandtl numbers. | David_010 | OpenFOAM Running, Solving & CFD | 0 | January 20, 2011 05:21 |
ATTENTION! Reliability problems in CFX 5.7 | Joseph | CFX | 14 | April 20, 2010 15:45 |
energy balance | zdz198728 | Main CFD Forum | 1 | November 19, 2009 00:07 |
Energy Balance | Harshad | CFX | 0 | March 5, 2008 06:36 |
HELP needed: Energy balance in gaseous combustion | James Willie | FLUENT | 11 | August 10, 2005 04:58 |