CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Problem regarding hexagonal mesh of complex geometry. (http://www.cfd-online.com/Forums/main/97574-problem-regarding-hexagonal-mesh-complex-geometry.html)

saurabhk February 20, 2012 16:43

Problem regarding hexagonal mesh of complex geometry.
 
1 Attachment(s)
Hey.
I am new to CFD and I have been given a project in CFD. So I need your help.
I want to model the flow of air inside a spray dryer for which I have to develop a geometry. The spray dryer is a cylinder on cone type with a annular inlet at the top. The outlet pipe of the spray dryer starts from within the cone volume.
I have developed the geometry by splitting the outlet pipe wall from the cone volume but now I am not been able to mesh the remaining volume using hexagonal mesh. i have tried with tetrahedron mesh but result are having some error.
Please help me.
Thanks in advance.

oloche September 18, 2014 10:02

Request
 
I am new in CFD in general and in dis forum. please I need help with creating a hollow in the solid of my spray dryer using design modeler and my research time is almos up and I av done nothing can You help me?
Thank You!


All times are GMT -4. The time now is 19:31.