CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Mesh Generation & Pre-Processing (http://www.cfd-online.com/Forums/mesh-generation/)
-   -   Cubit old version or similar software (http://www.cfd-online.com/Forums/mesh-generation/114306-cubit-old-version-similar-software.html)

File March 8, 2013 12:52

Cubit old version or similar software
 
Hi,

I am looking for an older Cubit release. My colleague said that Cubit used to be a free software but it isn't anymore so I would be grateful if anybody has some older version which is still free licensed

Furthermore I am looking for some open source or license free mesh generator with graphical interface which is suitable for meshing porous media. The objective is to make a 3D mesh with around 10 million nodes

tnx :)

jchawner March 10, 2013 17:14

Hi Filip:

To the best of my knowledge, Cubit has never been free. It has been developed by the U.S. Dept. of Energy and distribution has been very limited. However, I heard a rumor that there was going to be an open source version of Cubit but there has been no follow-through on that yet as far as I know.

For open-source or license-free meshing software you should probably start looking at the tools used with OpenFOAM.

Best Regards

File March 12, 2013 06:05

Thank you John,

It seems that I had a wrong information about Cubit previous license :(

Nevertheless a colleague told me that there is a mesh generator called GMSH which could be useful for my purpose ;)

Unfortunately mesh generator provided with OpenFOAM is not suitable for my case

Regards


All times are GMT -4. The time now is 11:47.