|
[Sponsors] |
March 8, 2013, 11:52 |
Cubit old version or similar software
|
#1 |
New Member
Filip Gjetvaj
Join Date: Mar 2013
Location: Montpellier, FR
Posts: 17
Rep Power: 13 |
Hi,
I am looking for an older Cubit release. My colleague said that Cubit used to be a free software but it isn't anymore so I would be grateful if anybody has some older version which is still free licensed Furthermore I am looking for some open source or license free mesh generator with graphical interface which is suitable for meshing porous media. The objective is to make a 3D mesh with around 10 million nodes tnx |
|
March 10, 2013, 16:14 |
|
#2 |
Senior Member
John Chawner
Join Date: Mar 2009
Location: Fort Worth, Texas, USA
Posts: 275
Rep Power: 18 |
Hi Filip:
To the best of my knowledge, Cubit has never been free. It has been developed by the U.S. Dept. of Energy and distribution has been very limited. However, I heard a rumor that there was going to be an open source version of Cubit but there has been no follow-through on that yet as far as I know. For open-source or license-free meshing software you should probably start looking at the tools used with OpenFOAM. Best Regards
__________________
John Chawner / jrc@pointwise.com / www.pointwise.com Blog: http://blog.pointwise.com/ on Twitter: @jchawner |
|
March 12, 2013, 05:05 |
|
#3 |
New Member
Filip Gjetvaj
Join Date: Mar 2013
Location: Montpellier, FR
Posts: 17
Rep Power: 13 |
Thank you John,
It seems that I had a wrong information about Cubit previous license Nevertheless a colleague told me that there is a mesh generator called GMSH which could be useful for my purpose Unfortunately mesh generator provided with OpenFOAM is not suitable for my case Regards |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OpenFOAM on cluster: version GLIBCXX_3.4.9 and GLIBCXX_3.4.11 not found | ovie | OpenFOAM | 10 | April 19, 2021 18:06 |
Source Pack Installation OpenFOAM Version 2.1.0 on Redhat Linux | Indrajit | OpenFOAM Installation | 1 | April 1, 2012 04:39 |
version GLIBCXX_3.4.9 and GLIBCXX_3.4.11 not found | ovie | Main CFD Forum | 1 | April 19, 2010 14:00 |
[OpenFOAM] Problem with paraFoam on a linux-64 bit | bunni | ParaView | 4 | April 14, 2010 20:55 |
Forum Software Plugin VBSEO Upgraded to Version 3.3.1 | pete | Site News & Announcements | 0 | September 6, 2009 05:18 |