Oscillate Airfoil by Changing Boundary Condition

dancfd · July 10, 2013, 23:14

Hello all,

I am trying to model an airfoil oscillating in pitch, however the software that I am using cannot handle the large pitch oscillations by deforming the mesh (or by rotating a mesh within a mesh). As a result, I have attempted to oscillate the inlet velocity boundary condition while maintaining a static mesh. So far the results have been positive, but I would like to make reference to a similar approach by someone else to substantiate my approach. Does anyone know of a simulation documented in a conference/journal paper or thesis that uses this approach? I have been unable to find one.

Thanks,

Dan

Manish CFD · July 26, 2013, 02:48

visit www.hitechcfd.com

dancfd · July 28, 2013, 17:06

Hello Manish,

Thanks for the advice, however I think contracting out my thesis might go over poorly with the university.

Any other ideas? Someone must have used this approach before.

Regards,

Dan

Rimple · September 17, 2022, 09:57

Could you please tell, how we define oscillating boundary conditions to keep the mesh static?

July 10, 2013, 23:14	Oscillate Airfoil by Changing Boundary Condition	#1
dancfd Senior Member Daniel Join Date: Jul 2009 Location: Montreal, Canada Posts: 156 Rep Power: 16	Hello all, I am trying to model an airfoil oscillating in pitch, however the software that I am using cannot handle the large pitch oscillations by deforming the mesh (or by rotating a mesh within a mesh). As a result, I have attempted to oscillate the inlet velocity boundary condition while maintaining a static mesh. So far the results have been positive, but I would like to make reference to a similar approach by someone else to substantiate my approach. Does anyone know of a simulation documented in a conference/journal paper or thesis that uses this approach? I have been unable to find one. Thanks, Dan

July 26, 2013, 02:48	We can Help	#2
Manish CFD New Member Manish Patel Join Date: Jul 2013 Location: Ahmedabad, Gujarat India Posts: 1 Rep Power: 0	visit www.hitechcfd.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Time dependant pressure boundary condition	yosuke1984	OpenFOAM Verification & Validation	3	May 6, 2015 06:16
Question about heat transfer coefficient setting for CFX	Anna Tian	CFX	1	June 16, 2013 06:28
Error finding variable "THERMX"	sunilpatil	CFX	8	April 26, 2013 07:00
CFX fails to calculate a diffuser pipe flow	shenying0710	CFX	7	March 26, 2013 04:13
Setting boundary condition for C-grid airfoil	quarkz	FLUENT	0	December 28, 2010 14:37

July 28, 2013, 17:06		#3
dancfd Senior Member Daniel Join Date: Jul 2009 Location: Montreal, Canada Posts: 156 Rep Power: 16	Hello Manish, Thanks for the advice, however I think contracting out my thesis might go over poorly with the university. Any other ideas? Someone must have used this approach before. Regards, Dan

September 17, 2022, 09:57		#4
Rimple New Member Rimple Join Date: Sep 2022 Posts: 1 Rep Power: 0	Could you please tell, how we define oscillating boundary conditions to keep the mesh static?