CFD Online Logo CFD Online URL
Home > Forums > Mesh Generation & Pre-Processing

spline in gmsh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   November 16, 2013, 02:05
Default spline in gmsh
Join Date: Jan 2013
Location: Japan
Posts: 95
Rep Power: 4
kkpal is on a distinguished road
can some one please tell me what is the equation for spline in gmsh.
I used spline to create a line joining several points, but when i do the same in matlab using spline, the two lines are obviously different.s
kkpal is online now   Reply With Quote


equation, gmsh, spline

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cgns support for gmsh robyTKD Open Source Meshers: Gmsh, Netgen, CGNS, ... 0 November 15, 2012 10:21
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 04:52
gmshToFoam problem: not the same mesh in Gmsh vs. paraview zhernadi Open Source Meshers: Gmsh, Netgen, CGNS, ... 8 July 7, 2011 02:28
Import problem ARC Open Source Meshers: Gmsh, Netgen, CGNS, ... 0 February 27, 2010 11:56
How does Gmsh deal with overlap boundaries? yuhai Open Source Meshers: Gmsh, Netgen, CGNS, ... 1 April 24, 2009 13:34

All times are GMT -4. The time now is 23:33.