Intracranial Aneurysm Meshing

freida · December 6, 2013, 09:36

Hello CFD experts!!!

I am a complete newbie at this and just started learning CFD for my final year project. It is based on intracranial aneurysm where I have the geometry in a .stl format and tried using ansys (14.5) meshing. However it wouldn't allow me to generate a simple initial mesh as well!!!! Before this I tried using IA-FEM but was told not to by my project supervisor!!! What am I doing wrong???

Has anybody done this before? Could someone please help me and guide me!!!

Thanks in advance!

tcarrigan · December 6, 2013, 16:57

Hello,

You may want to look at Pointwise.

I've personally generated both viscous multiblock structured and hybrid grids for intracranial aneurysm geometries using Pointwise. While the structured approach is a little more hands-on and involved, you do end up with a high quality grid that improves the prediction of things like rupture, etc.

My experience generating hybrid viscous grids for aneurysm geometry in the STL format has been positive as well. Unstructured and hybrid approaches are more automated, significantly reducing the meshing time.

If you're interested, have your supervisor submit an evaluation request at www.pointwise.com/free.

Regards,
Travis

December 6, 2013, 09:36	Intracranial Aneurysm Meshing	#1
freida New Member Join Date: Dec 2013 Posts: 2 Rep Power: 0	Hello CFD experts!!! I am a complete newbie at this and just started learning CFD for my final year project. It is based on intracranial aneurysm where I have the geometry in a .stl format and tried using ansys (14.5) meshing. However it wouldn't allow me to generate a simple initial mesh as well!!!! Before this I tried using IA-FEM but was told not to by my project supervisor!!! What am I doing wrong??? Has anybody done this before? Could someone please help me and guide me!!! Thanks in advance!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Aneurysm + Stent Meshing !	rjd150	ANSYS Meshing & Geometry	5	May 11, 2016 12:21
[ANSYS Meshing] Migrating from GAMBIT to ANSYS Meshing	David-CFD	ANSYS Meshing & Geometry	1	April 1, 2011 05:22
Singularity of grid?Volume meshing vs face meshing	Ken	Main CFD Forum	0	September 4, 2003 11:09
Volume Meshing & Face Meshing? singularity of grid	ken	FLUENT	0	September 4, 2003 11:08

December 6, 2013, 16:57		#2
tcarrigan Senior Member Travis Carrigan Join Date: Jul 2010 Location: Arlington, TX Posts: 161 Rep Power: 15	Hello, You may want to look at Pointwise. I've personally generated both viscous multiblock structured and hybrid grids for intracranial aneurysm geometries using Pointwise. While the structured approach is a little more hands-on and involved, you do end up with a high quality grid that improves the prediction of things like rupture, etc. My experience generating hybrid viscous grids for aneurysm geometry in the STL format has been positive as well. Unstructured and hybrid approaches are more automated, significantly reducing the meshing time. If you're interested, have your supervisor submit an evaluation request at www.pointwise.com/free. Regards, Travis