|July 31, 2012, 14:01||
Help need to simulate flow around Contra rotating Fan
Join Date: May 2012
Posts: 93Rep Power: 6
I am trying to simulate flow around Contra rotating Fan using Full Non Matching
Mixing Plane. I meshed my geometry in Autogrid5 and I am trying to simulate in FineTurbo. The flow is steady and incompressible with a blade speed of 1029 rpm. I use Spalart–Allmaras turbulence model with velocity inlet (68 m/s), pressure outlet (Radial equilibrium) as the boundary condition and I imposed Farfield velocity as 68 m/s. The Periodic angle for the front rotor is 32.7272 degree and 40 degree. There are nearly 6.5 million cells.
In the initialization of simulation, I gave 98500 pascal as inlet pressure and 90000 pascal as pressure in mixing plane. I ran simulation, after two iteration it say solution blow out, Process killed, Crashed. I tried with different boundary condition but nothing helped me. I am not able to figure out the problem.
Please Can anyone give me some suggestions to run my simulation.
|Thread||Thread Starter||Forum||Replies||Last Post|
|How to simulate a simple fan inside a room ?||rafiktharwat||CFX||10||September 23, 2014 02:51|
|Axial Flow Fan||mawais15||Main CFD Forum||7||May 26, 2011 08:42|
|Axial Flow fan Positioning||Megatron||Main CFD Forum||0||January 20, 2011 02:33|
|How to simulate the fan driven by the airflow?||Jason||FLUENT||2||April 17, 2008 15:56|
|flow simulation across a small fan||jane luo||Main CFD Forum||15||April 12, 2004 17:49|