CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

import autogrid mesh in cfx

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 15, 2013, 03:34
Default import autogrid mesh in cfx
  #1
New Member
 
Rike
Join Date: Mar 2013
Posts: 2
Rep Power: 0
Rike is on a distinguished road
hey,

i have an .cgns file with a mesh of an axial fan which was generated with autogrid. now i want to simulate this fan with cfx.
but when i import the mesh in cfx-pre i only get the 3-d volumes of the blocking and the 2-d areas are always the whole surface of the 3-d volume. so like this i cannot define any boundary conditions like inlet outlet and wall conditions.
is there a way to get the connection between the blocking of the mesh automatically?
i hope the description of my problem is not too confusing.
i would be really happy if someone of you can help with this

Rike
Rike is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Does CFX have a button to refine the mesh? lnk CFX 2 July 27, 2012 16:02
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 04:52
Error about import mesh from CFD to CFX Stephen CFX 8 June 27, 2011 09:02
Import cfx mesh into fluent Michele CFX 0 March 22, 2006 09:43
hex mesh using cfx mesh. mehul CFX 0 October 31, 2005 08:01


All times are GMT -4. The time now is 02:30.