CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

Problem with generating and meshing T.E of rotor

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 26, 2013, 10:46
Post Problem with generating and meshing T.E of rotor
  #1
New Member
 
cfd enthusiasist
Join Date: Jun 2013
Posts: 1
Rep Power: 0
nischithreddy92 is on a distinguished road
Hii all,
I am working on the tool Numeca Autogrid 5 and im finding a problem to model and mesh the trailing edge slot of the rotor,the rotor is very curved and its difficult to model but the customer insists,so please help by giving any valid procedure for modeling the same.

Thanks in advance
nischithreddy92 is offline   Reply With Quote

Old   June 27, 2013, 03:38
Default
  #2
Member
 
CJ
Join Date: Apr 2010
Location: Malaysia
Posts: 69
Rep Power: 7
oldshoes81 is on a distinguished road
Send a message via MSN to oldshoes81 Send a message via Skype™ to oldshoes81
Hi,

Check if you have used the correct template. If the sharp edge creates the trouble, force it to ROUND edge.
__________________
Regards
CJ
NUMIT Enterprise, Malaysia
+6 017 656 3436
http://maccom-numit.blogspot.com
http://www.numit.com.my
Email : seiko.q@numit.com.my
oldshoes81 is offline   Reply With Quote

Old   June 28, 2013, 04:06
Default
  #3
Senior Member
 
Hamid Zoka
Join Date: Nov 2009
Posts: 162
Rep Power: 8
Hamidzoka is on a distinguished road
Could you leave a geometry of your airfoil at TE ?
Hamidzoka is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with querying the meshing database in CFX-Pre ashtonJ CFX 4 August 15, 2014 20:55
[ANSYS Meshing] Problem with structured meshing pipe elbow Kirjain ANSYS Meshing & Geometry 8 February 7, 2014 11:05
[ANSYS Meshing] ICEM Meshing problem drvincentip ANSYS Meshing & Geometry 1 May 2, 2013 17:31
Meshing problem with ansys default mesher wh88 ANSYS 5 October 5, 2011 16:27
Catalogue size problem but while meshing! Jo Bouchard CFX 2 December 28, 2005 12:32


All times are GMT -4. The time now is 03:22.