CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Fidelity CFD

Use of Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 16, 2013, 11:54
Default Use of Mesh
  #1
Member
 
mistry
Join Date: Apr 2009
Location: India
Posts: 69
Rep Power: 16
csmistry is on a distinguished road
Dear friends,

I am new user to Numeca. I would like to compare the ANSYS CFX results with Numeca. For the comparison i would like to use same mesh which i used for ANSYS with *.gtm format.

Suggest me the way to do it...

Thanks
csmistry is offline   Reply With Quote

Old   October 21, 2013, 06:25
Default
  #2
Senior Member
 
Hamid Zoka
Join Date: Nov 2009
Posts: 282
Rep Power: 18
Hamidzoka is on a distinguished road
Hi,
When you generate an IGG mesh project in Numeca, it normally generate a *.CGNS file and saves it in your destination folder.
You can easily open CFX and import this *.CGNS file.
Another way is to export your mesh as *.msh file (Fluent mesh format) and again import it to CFX.
Be careful to define the boundaries correctly in CFX!

Regards
Hamidzoka is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Star CCM Overset Mesh Error (Rotating Turbine) thezack Siemens 7 October 12, 2016 12:14
[ICEM] surface mesh merging problem everest ANSYS Meshing & Geometry 44 April 14, 2016 07:41
Inner geometry gets lost exporting mesh from ICEM CFD to CFX-Pre powpow CFX 3 December 20, 2012 10:14
[ICEM] Problem making structural mesh on a surface froztbear ANSYS Meshing & Geometry 1 November 10, 2011 09:52
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11


All times are GMT -4. The time now is 13:47.