| inarus |
February 15, 2015 22:39 |
Fine/Marine mesh improvement issue
Hello all,
I'm working on a small project, and I'm not that familiar with all Numeca's functionality and tricks.
I've got this:
Code:
-------------------------------------------------
SCRIPT FOR MESH QUALITY CHECK IN HEXPRESS
-------------------------------------------------
MESH QUALITY CHECK REPORT
>>> Domain: export_cf
> 2115936 cells
> Number of negative cells = 0
> Number of concave cells = 0
> Number of twisted cells = 0
--- ORTHOGONALITY ---
Min Max Average Standard deviation
12.80 90.00 80.13 9.37
--- ASPECT RATIO ---
Min Max Average Standard deviation
1.00 438.01 14.71 22.61
--- EXPANSION RATIO ---
Min Max Average Standard deviation
1.00 11.19 1.39 0.39
> Computed quality color code: YELLOW
> Mesh quality is satisfying, but it could be improved
> Reason(s):
- Minimum Orthogonality: 12.80
-> Solution: increase Minimum Orthogonality to 15 degrees
- Maximum Expansion Ratio: 11.19
-> Solution: decrease Maximum Expansion Ratio to 5
------------------------------------
MESH QUALITY CHECK IS OVER
------------------------------------
I studied the user manuals, and I can't find something related on how to fix the mesh.
Every issue propose a solution, therefore, my question would be, how to do it?
Thank you very much. |
