CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   NUMECA (http://www.cfd-online.com/Forums/numeca/)
-   -   People researching on Water Turbines (http://www.cfd-online.com/Forums/numeca/50940-people-researching-water-turbines.html)

Roque Lopez September 29, 2004 11:26

People researching on Water Turbines
 
Hi everyone!!

I'm using Numeca's Fine/Turbo and Fine/Design3D to study water turbines (particularly Francis type). I have a lot of questions and most of them are being solved by the support team of Numeca, but I still want to discuss with people whom is actually working with water turbines in order to share experience and knowledge with them. Also I'm looking to make contact with people and research centers in which I could start my graduate studies next year, I'm from Mexico. Thanks!

Roque.

Bak_Flow February 26, 2005 17:42

Re: People researching on Water Turbines
 
Hi Roque,

I have done a lot of work with hydro-turbine simulations, including coupled stay-vane, wicket gate and runner studies, cavitation studies, draft tube analysis, etc.

Let me know a bit more about what you are doing.

Regards,

Bak_Flow

yasmin April 24, 2005 13:28

Re: People researching on Water Turbines
 
i'm a student at faculty of engineering in power departement. I need some help in my search for water or gas turbine. If you can help so plz .

Rashmi Ampadu-Sam September 28, 2005 10:53

Re: People researching on Water Turbines
 
please send me any information you can as i intend to develop and construct my own water turbine for testing

ArslanOZCAN May 17, 2012 07:42

Hi;

It's been 7 years since the last post :s if you still read these messages please reply.

I am working on Francis turbine design and optimization. Do you havbe any good document on design processes of Francis turbine ?

sajad December 1, 2012 10:59

Quote:

Originally Posted by ArslanOZCAN (Post 361647)
Hi;

It's been 7 years since the last post :s if you still read these messages please reply.

I am working on Francis turbine design and optimization. Do you havbe any good document on design processes of Francis turbine ?


Hi Arsalan
I am working on optimization of Francis turbine.
I think i can give you some help and i need some help too
please give me your email adress

ArslanOZCAN December 1, 2012 15:54

Hi Sajad;

You can reach me via arslanomurozcan@gmail.com

Best Regards.


All times are GMT -4. The time now is 11:48.