CFD Online Logo CFD Online URL
Home > Forums > NUMECA

about boundary conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   November 8, 2004, 10:16
Default about boundary conditions
Posts: n/a
there is a segregator with bulb and to set the boundary conditions. i set vecolity and static temperature at inlet,static pressure at outlet.however,after 2000 steps,global residual is about -0.5,massflow error between inlet and outlet is 10%. grid quality:min orthogonality is 9.46,max aspect ratio is 10000(because of bulb). thank you very much!
  Reply With Quote

Old   May 11, 2012, 07:45
New Member
Join Date: May 2012
Posts: 8
Rep Power: 5
yujiabeizi is on a distinguished road
u can set total pressure at inlet and total temperature ,static temperature at outlet.
yujiabeizi is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Burgerbs equation non constant Boundary Conditions Initial Conditions arkangel OpenFOAM Running, Solving & CFD 1 October 2, 2008 14:48
Boundary conditions for turbulent boundary layer Thomas FLUENT 1 June 17, 2008 05:14
boundary conditions for boundary layer flow A. Al-zoubi CFX 0 November 3, 2007 08:11
Integral boundary conditions turbulent intensitylength boundary conditions olesen OpenFOAM Running, Solving & CFD 0 July 27, 2006 07:18
boundary conditions Jason Jordan FLUENT 0 June 26, 2001 17:12

All times are GMT -4. The time now is 08:59.