CFD Online Logo CFD Online URL
Home > Forums > NUMECA

Convergence using multigrid solving

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 14, 2005, 08:25
Default Convergence using multigrid solving
kleinclaus christophe
Posts: n/a
Hy eveybody,

I'm student at the University in Munich(Germany). I'm trying to use Numeca Fine solver and his multigrid calculation. The problem is that my grid is generated with the newest Igg/Autogrid version and saved as Fine 6. The solver, witch is a older version (6.3.2), can read this data file. The problem is that my grid is everywhere multiple of 16 so I can solve the airflow on 3 grids, from the coarse to the finest. there is no problem with 2 first grids, but as the computer changes on the last and finest grid an error occures. I've seen that the residuals increase suddently at every grid change, maybe that is the problem. I would like to know if someother people have this problem, if someone has solved it maybe with some expert parameters, or to reduce the increase between the grids... Thx for the answers bye
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Multigrid Althea FLUENT 7 September 14, 2010 05:59
MULTIGRID Tiz Main CFD Forum 4 July 23, 2007 08:48
Multigrid cfd101 Main CFD Forum 1 March 5, 2006 21:45
MULTIGRID 3D Davoche Main CFD Forum 8 June 20, 2005 11:06
solving till convergence noName Main CFD Forum 1 December 21, 2004 10:47

All times are GMT -4. The time now is 21:29.