CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

Using the Fine/Design3D module

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 7, 2005, 21:56
Default Using the Fine/Design3D module
  #1
yan
Guest
 
Posts: n/a
an diagonal water pump with 4 blades of blunt leading edge and trailing edge. while using the simple Bezire curve(GA,B1,B2) to construct the camber curve, I limit the thickness distribution to be constant parameters. the free parameters are the 3 angles of camber curve(GA,B1,B2); the two angels of Lean Law. however, i could not control the lenth of camber curve in every sections which will change with the angel GA. of course i could limit GA in every section as a constant value but it is not the case actully. i don't know whether i have post my problem clearly. the forum do not support picture uploads. if you want i can email my bad DATABASE SAMPLE to you who send me emails.

it's my first time to use the Fine/Design3D module.
  Reply With Quote

Old   September 21, 2005, 18:53
Default Re: Using the Fine/Design3D module
  #2
.
Guest
 
Posts: n/a
don't they support this software?
  Reply With Quote

Old   September 21, 2005, 22:02
Default Re: Using the Fine/Design3D module
  #3
yan
Guest
 
Posts: n/a
I'm afraid so
  Reply With Quote

Old   September 6, 2006, 06:14
Default Re: Using the Fine/Design3D module
  #4
hong
Guest
 
Posts: n/a
chao
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help for Fine/Design3D stewart NUMECA 1 September 6, 2006 06:14
the problem about design3D younger NUMECA 1 March 21, 2006 11:44
a survey on design3d abscissa NUMECA 0 December 1, 2004 03:41
MHD Module Benny FLUENT 0 March 16, 2004 06:04
Re:MHD Module Benny FLUENT 0 November 16, 2003 23:25


All times are GMT -4. The time now is 01:58.