CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

the problem about design3D

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 24, 2006, 11:14
Default the problem about design3D
  #1
younger
Guest
 
Posts: n/a
I optimized rotor 37 by fine/design3D. I can suceed in accomplishing Fitting, Screening, Database. However,there is a problem in Optimization model. After importing the .trb file in CFD package, importing a training database and setting objective fuction, there is a warning about "DATABASE FILE/NOT FOUND" when I press process/start. And the optimization can not be run.

  Reply With Quote

Old   March 21, 2006, 11:44
Default Re: the problem about design3D
  #2
aji
Guest
 
Posts: n/a
Dear Younger,

You can send your problem to support@numeca.be. They will be glad to help.

Regards,

Aji
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem in Modelling Heat Transfer Problem Deepak R FLUENT 1 December 6, 2007 10:37
Help for Fine/Design3D stewart NUMECA 1 September 6, 2006 06:14
Using the Fine/Design3D module yan NUMECA 3 September 6, 2006 06:14
problem in solving "wave generation" problem san FLUENT 2 April 3, 2006 23:37
a survey on design3d abscissa NUMECA 0 December 1, 2004 03:41


All times are GMT -4. The time now is 20:50.