CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

Error: Failure of connection algorithm

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 17, 2006, 07:21
Default Error: Failure of connection algorithm
  #1
Shivakumar
Guest
 
Posts: n/a
Dear sir, i am solving Conjugate heat transfer problem. while solving i got one error i.e. "failure of connection algorithm". i have given full nonmatching boundary condition to solid wall which is in contact with the fluid. Now what i have to do to over come from the error.

  Reply With Quote

Old   March 22, 2006, 16:28
Default Re: Error: Failure of connection algorithm
  #2
Roque Lopez
Guest
 
Posts: n/a
Dear Shivakumar,

Did you make sure that both mesh block faces (solid and fluid) are projected on the same geometrical surface? If not, that can be done before setting FNMB in the QuickAccess Pad > Generate > Project Face (fourth button from your left to right). Also, you can perform a check while defining FNMB with the "Compute & Show" button, if no errors are given, the solver shouldn't crash... I hope to help... Roque.
  Reply With Quote

Old   May 16, 2006, 05:07
Default Re: Error: Failure of connection algorithm
  #3
umaeishh
Guest
 
Posts: n/a
Hi sheeev, failure of connection is due to the network failure.just check ur lan connection and restart ur system.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Solver failure with error Sameer CFX 4 December 22, 2010 18:20
SolidWorks Connection andrew mettler hayes FLUENT 3 August 8, 2007 14:48
connection with a server greg FLUENT 4 August 16, 2006 01:26
Error: No connection between equations Reena CFX 2 June 15, 2006 12:11
ISAT error and ddasac failure Stephen Mattick FLUENT 1 July 18, 2003 13:57


All times are GMT -4. The time now is 16:35.