CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

how to deremine boundary layer height?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 5, 2006, 05:22
Default how to deremine boundary layer height?
  #1
Mike
Guest
 
Posts: n/a
I have faecd a fact that from manual thet when u are going to capture near wall region you have to refine mesh at near wall region ,and your y plus should be in limit of 11.In your boundary layer there should be 10 nodes.but how to determine this hight.i.e. there should be these much nodes in this hight so that we can mesh according to that. Thaks in advance.

  Reply With Quote

Old   January 9, 2007, 14:14
Default Re: how to deremine boundary layer height?
  #2
Dr. Khalid
Guest
 
Posts: n/a
Hi, oh ya this is a (Scheiss) problem, any way here is an idea which might work, try to perform this { ||V-over(arrow)||/||V-over(arrow)_sub(inf)|| =< approx.(0.95) }; that is you compute the local velocity vector and divide by the velocity vector far away and compare the result with some user defined value (~0.95); if it is less then refine the grid and vice versa(coarsen the grid). Please let me know if it works! Hope helped cheers.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Height of boundary layer DAK565656 CFX 2 April 19, 2007 11:30
how to deremine boundary layer height? Mike Phoenics 2 March 7, 2007 13:47
how to deremine boundary layer height? Mike CFX 5 April 6, 2006 08:15
how to deremine boundary layer height? Mike CD-adapco 1 April 5, 2006 10:47
how to deremine boundary layer height? Mike FLUENT 1 April 5, 2006 09:34


All times are GMT -4. The time now is 09:56.