CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   NUMECA (http://www.cfd-online.com/Forums/numeca/)
-   -   IGG AUTO-Grid (http://www.cfd-online.com/Forums/numeca/51026-igg-auto-grid.html)

Michael January 5, 2007 14:42

IGG AUTO-Grid
 
Hello altogether, I have tried to learn Fine. The most things ale clear for me but I do not know how the IGG Auto-Grid works. Have anybody a short discription how it works?

Thank you very much in advance.

Best regards

Michael

E Fardream April 27, 2007 11:14

Re: IGG AUTO-Grid
 
Import your geometry and click generate 3d mesh... Simply doing so means the poor quality of the mesh, however, you can refer the detailed user manual to find how to improve the quality.

colinda June 5, 2007 04:16

Re: IGG AUTO-Grid
 
In the new mesh generator AutoGrid 5 you can use the button "Reset Default Topology" and then Generate 3D mesh to get a good quality mesh in most cases.


Hamidzoka November 25, 2009 02:22

you will find useful tutorials in the following site:

www.Numeca-beijing.com

this is website of numeca branch in china.


All times are GMT -4. The time now is 03:32.