CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

help:AUTOBLADE

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 2, 2007, 03:09
Default help:AUTOBLADE
  #1
haider
Guest
 
Posts: n/a
hi:

i am new to numeca, want to make geometry of "NASA ROTOR 37" by using the values in AGARD-AR-355 like solodity, aspect ratio and figure etc in AUTOBLADE, how can i do this?

Any AUTOBLADE tutorials?

Thanx.

  Reply With Quote

Old   June 20, 2007, 11:25
Default Re: help:AUTOBLADE
  #2
Djeghri Noureddine
Guest
 
Posts: n/a
Hi Haider,

I have developed my own grid generator and CFD flow solver (Euler/Laminar Navier-Stokes) written in fortran 90 and I have test them with NASA Rotor 37.

Now, I want to implement a turbulence model, necessary for viscous calculation in transonic compressor.

if you are interested by my codes, give me please your email-address.

Cordially
  Reply With Quote

Old   June 22, 2007, 00:28
Default Re: help:AUTOBLADE
  #3
haider
Guest
 
Posts: n/a
Thnx

alihaider82@gmail.com
  Reply With Quote

Old   July 2, 2007, 02:25
Default Re: help:AUTOBLADE
  #4
sam
Guest
 
Posts: n/a
sijal2005@gmail.com
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help for Autoblade Fitting stewart NUMECA 15 July 7, 2012 08:01
AUTOGRID and AUTOBLADE strengths and limitations Haider NUMECA 1 December 6, 2007 21:24
AutoBlade for airfoils?? Steve NUMECA 2 August 4, 2003 09:45


All times are GMT -4. The time now is 20:06.