CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   NUMECA (http://www.cfd-online.com/Forums/numeca/)
-   -   CFView run on the Suse10.2 system has an erro (http://www.cfd-online.com/Forums/numeca/51047-cfview-run-suse10-2-system-has-erro.html)

exergy August 18, 2007 22:38

CFView run on the Suse10.2 system has an erro
 
when run the CFView on the suse10.2,has an erro: ------------- /bine/uname error while loading shared libraries: libc.so.6 cannot open shared object file: No such file or directory ------------- How to correct this problem?

Emanuele September 20, 2007 16:21

Re: CFView run on the Suse10.2 system has an erro
 
May be you have just solved the problem but i got the same error. Anyway suse 10.2 is not supported, switch to suse 10. they have different compilers and with 10.2 cfview doesn't work. regards emanuele

Andrew de Wet September 26, 2007 05:36

Re: CFView run on the Suse10.2 system has an erro
 
Maybe try 64-bit SuSE 10.2. I am currently using FINE/Turbo v7.4-1 on a 64-bit SuSE 10.2 machine and have no problems running it, including CFView. I can confirm Emanuele's CFView problem as we have had the same result on a 32-bit machine. The problem presisted on a 64-bit installation, but we later concluded it could be hardware related. The PC had an Intel motherboard with the 945G chipset, but my current PC has the Intel 965G chipset (Guardfish motherboard, Core2Duo E6600 CPU) with no problems.


All times are GMT -4. The time now is 13:17.