CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

HELP ME!!! I cannot import blade in autogrid!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 15, 2007, 11:53
Default HELP ME!!! I cannot import blade in autogrid!
  #1
Nicola
Guest
 
Posts: n/a
I try to import my blade file as .igs in autogrid but it crashes and writes a recovery .trb file! I don't have problems with hub and shroud. I import them as .dat file but I don't know how I must write my blade .dat file!

My blade is fully 3D so I must write more then two sections. Can you give me an example about the format please? I must write a suction_side.dat and a pressure_side.dat or I can write only a blade.dat?

Help me please! Thank you
  Reply With Quote

Old   December 15, 2007, 22:03
Default Re: HELP ME!!! I cannot import blade in autogrid!
  #2
Eddy
Guest
 
Posts: n/a
In fact, this is a common problem when importing UG files into autogrid. According my experience, I suggest that extracting the discrete points section by section of the blade(UG has the ability), then writing these point as a format of .geomturbo.

I think it is the best way to avoid crashing.

  Reply With Quote

Old   February 1, 2008, 04:38
Default Re: HELP ME!!! I cannot import blade in autogrid!
  #3
Jonathan Vlastuin
Guest
 
Posts: n/a
Hello, I had the same problem few weeks ago and I don't really know where it comes from. I don't know if you're working on Windows system, but I solved the problem by working on linux... Furthermore, it seems that the soft doesn't really like the suction and pressure side thing, it's better working with the full surface blade. I hope it can help... good luck
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
autogrid:leading edge liu wangkou NUMECA 2 August 22, 2008 19:42
how to import the curve into blade gen fadly CFX 2 August 23, 2007 04:27
Turbo components order in Blade-to-Blade View Aladdin CFX 0 March 17, 2007 10:01
About the using of AutoGrid 5 Wheeler NUMECA 0 November 5, 2005 08:05
Autogrid ked NUMECA 1 August 19, 2003 10:36


All times are GMT -4. The time now is 18:22.