CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   NUMECA (http://www.cfd-online.com/Forums/numeca/)
-   -   input RPM profile? (http://www.cfd-online.com/Forums/numeca/51066-input-rpm-profile.html)

Lee Sangdo April 18, 2008 00:35

input RPM profile?
 
I want to solve unsteady rotor-stator problme. can I input rotor rpm profile like rpm vs time in Fine?

Jin-Kwon KIM May 7, 2008 09:57

Re: input RPM profile?
 
Dear Mr.Sangdo Lee,

I am Jin-Kwon KIM, president of EngiSol Co, the Numeca distributor in Korea.

As far as I know, as of today, 2008.5.7., Fine/turbo does not have such function to input rpm profile like rpm vs time, which you asked and which might be used for transient simulation for machine startup or failure.

But Numeca support and development team are very responsive and reliable, and if you have intention of using Numeca solutions at such simulation, I am sure that they can accept your suggestion and support you with such fuctions.

Please email me your contact information, then I will contact you.

Look forward to hearing from and supporting you.

Best Regards,

Jin-Kwon KIM. ---EngiSol.com: ์œ ์ฒด,์-ด๊ณตํ•™ Total Solution --- ์†Œํ"„ํŠธ์›จ์–ด ๊ฐœ๋ฐœ, ํŒ๋งค, ๊ธฐ์ˆ ์ง€์› ๋ฐ ๊ด€๋ จ ๊ธฐ์ˆ ์ปจ์„คํŒ…. CFD(์ „์‚ฐ์œ ๋™ํ•ด์„):

- HEXPRESS, AutoGrid, IGG : ์ž๋™๊ฒฉ์ž ์ƒ์„ฑ

- FINE/Hexa (๋ฒ"์šฉ),

- FINE/Turbo(ํ„ฐ๋ณด๊ธฐ๊ณ„),

- FINE/Marine(์กฐ์„ )

- FINE/design3d (ํ„ฐ๋ณด๊ธฐ๊ณ„ ๋‚ ๊ฐœ ์ตœ์  ์„ค๊ณ„) ๋ฐฐ๊ด€๋ง ์œ ๋™/๊ตฌ์กฐ ํ•ด์„/์„ค๊ณ„

๋ฒ"์šฉ ๋ฐฐ๊ด€๋ง ์œ ๋™ํ•ด์„ : Piping Systems FluidFlow, AFT Fathom, Arrow

๋ฐฐ๊ด€๋ง ์ˆ˜์ถฉ๊ฒฉ, surge ํ•ด์„/์„ค๊ณ„: AFT Impulse

๋ฐฐ๊ด€๋ง ์ตœ์ ์„ค๊ณ„ : AFT Mercury, Titan

์ง€์-*๋‚œ๋ฐฉ ์-ด๋ฐฐ๊ด€๋ง ์œ ๋™/๊ตฌ์กฐ ํ•ด์„/์„ค๊ณ„: Flowra, sisKMR

์ƒ์ˆ˜๋„ ๋ฐฐ๊ด€๋ง ํ•ด์„/์„ค๊ณ„ : H2ONET ์œ ์ฒด๊ธฐ๊ณ„ ์„ค๊ณ„

- ํ„ฐ๋ณด๊ธฐ๊ณ„(ํŽŒํ"„,ํŒฌ,์••์ถ•๊ธฐ,ํ„ฐ๋นˆ)๋‚ ๊ฐœ 3์ฐจ์› ์-*์„ค๊ณ„ SW : TurboDesign/ TurboCfd

- ์›์‹ฌ/์‚ฌ๋ฅ˜ ํŒฌ/์†กํ'๊ธฐ ์„ค๊ณ„ : CFturbo

- FINE/design3d (ํ„ฐ๋ณด๊ธฐ๊ณ„ ๋‚ ๊ฐœ ์ตœ์  ์„ค๊ณ„) --- ๊น€์ง„๊ถŒ, ๊ณตํ•™๋ฐ•์‚ฌ, ๋Œ€ํ'œ, ์-"์ง€์ (EngiSol.com) ๊ฒฝ๊ธฐ ์•ˆ์–' ๋™์•ˆ ํ˜ธ๊ณ„ 555-9๋ฒˆ์ง€ 20๋™108ํ˜ธ(์šฐ.431-763) [์„œ์šธ] ์„œ์šธ ๊ด€์•… ์‹ ๋ฆผ9๋™ ์‚ฐ56-1๋ฒˆ์ง€ 313๋™207ํ˜ธ (์šฐ.151-742) --- Jin-Kwon KIM, Ph.D, president of EngiSol Co. Address: Bldg 20-108, Ho-Gye 555-9, Dong-an, An-yang, Kyung-ki, 431-763, South Korea [Seoul Office]: Bldg 313-207, San 56-1, Shin-lim, Kwan-ak, 151-742, Seoul, Korea. Tel: +82-2-874-6852 Mobile: +82-16-340-6826 Fax: +82-2-889-6205 Email(1st): realdog@paran.com Email(2nd): realdog@snu.ac.kr Email(3rd): jindoc@gmail.com Email(all): realdog@paran.com, realdog@snu.ac.kr, jindoc@gmail.com www.EngiSol.com


All times are GMT -4. The time now is 15:53.