CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   NUMECA (http://www.cfd-online.com/Forums/numeca/)
-   -   Can CFview reads CGNS ? (http://www.cfd-online.com/Forums/numeca/51067-can-cfview-reads-cgns.html)

Vinayender May 23, 2008 05:14

Can CFview reads CGNS ?
 
Hi all,

Can CFview reads CGNS file that contains grid and solution data ?

Thanks, Vinayender.

Eddy June 4, 2008 03:55

Re: Can CFview reads CGNS ?
 
Maybe can't

Vinayender June 6, 2008 03:40

Re: Can CFview reads CGNS ?
 
Hi,

Thanks Eddy for your response.

Recently I found that CFView can read CGNS File if the geometry is written in x,y,z coordinates. But it is not reading if the geometry is written in cylindrical coordinates.. Can any one help me out in this regard.

Thanks, Vinayender.

Aji July 15, 2008 13:19

Re: Can CFview reads CGNS ?
 
Dear Vinayender,

Could you use Plot3D format? CFView can read this format.

Regards,

AJi


Stephan July 18, 2008 02:43

Re: Can CFview reads CGNS ?
 
Dear Vinayender,

Generally CFView is supporting 2D and 3D structured multi-block and unstructured CGNS data sets. May you know - CGNS is a general purpose format for CFD data storage and cross system compatibility.

As far I could see, there are some information included also in the CFView manual, but maybe not specific anbough for your question. Numeca is refering to http://www.cgns.org for a complete presentation of the format.

May this will help? Regards,

Stephan

Vinayender July 23, 2008 08:14

Re: Can CFview reads CGNS ?
 
Dear Aji,

Thank you very much for your replay. Will it also support if I write the Grid in Cylindrical coordinates ?

Thanks, Vinayender.

Vinayender July 23, 2008 08:16

Re: Can CFview reads CGNS ?
 
Dear Aji,

Thank you very much for your replay. Will it also support if I write the Grid in Cylindrical coordinates ?

Thanks, Vinayender.


Vinayender July 23, 2008 08:17

Re: Can CFview reads CGNS ?
 
Dear Stephan,

Thank you very much for your replay. I would certainly refer to them.

Thanks, Vinayender.


afeng0796 July 21, 2009 05:25

The Tecplot or tec360 will help,and it supports CGNS format

vinayender November 27, 2009 12:50

Thank you all
 
Thank you all for your replays !!
My porblem got resolved :)

csmistry March 17, 2011 08:57

Dear Vinayender,
My company is planning to purchase CFD software and for that CFX,StarCD and Numeca we bhave option out of which we want to compare their results with same mesh and boundary conditions can you suggest something how to insert CFX mesh to Numeca?

thanks

sanboju May 10, 2011 07:32

Numeca mesh
 
Hi,

Try to use hypermesh to convert any CFD file in a Numeca file, and viceversa. I used that program to mesh some structures for Abaqus FEM, Nastran and Ansys but I've just read about the possibility of mesh the environment like any CFD.

If you try to use Numeca IGG environment you'll see that mesh code is very comfortable and the smothing surface option makes a better mesh with a better flow transfer between cells

cheers,
Sanboju


All times are GMT -4. The time now is 21:01.