CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

Can CFview reads CGNS ?

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree4Likes
  • 1 Post By Aji
  • 1 Post By Stephan
  • 1 Post By afeng0796
  • 1 Post By sanboju

Reply
 
LinkBack Thread Tools Display Modes
Old   May 23, 2008, 05:14
Default Can CFview reads CGNS ?
  #1
Vinayender
Guest
 
Posts: n/a
Hi all,

Can CFview reads CGNS file that contains grid and solution data ?

Thanks, Vinayender.
  Reply With Quote

Old   June 4, 2008, 03:55
Default Re: Can CFview reads CGNS ?
  #2
Eddy
Guest
 
Posts: n/a
Maybe can't
  Reply With Quote

Old   June 6, 2008, 03:40
Default Re: Can CFview reads CGNS ?
  #3
Vinayender
Guest
 
Posts: n/a
Hi,

Thanks Eddy for your response.

Recently I found that CFView can read CGNS File if the geometry is written in x,y,z coordinates. But it is not reading if the geometry is written in cylindrical coordinates.. Can any one help me out in this regard.

Thanks, Vinayender.
  Reply With Quote

Old   July 15, 2008, 13:19
Default Re: Can CFview reads CGNS ?
  #4
Aji
Guest
 
Posts: n/a
Dear Vinayender,

Could you use Plot3D format? CFView can read this format.

Regards,

AJi

vinayender likes this.
  Reply With Quote

Old   July 18, 2008, 02:43
Default Re: Can CFview reads CGNS ?
  #5
Stephan
Guest
 
Posts: n/a
Dear Vinayender,

Generally CFView is supporting 2D and 3D structured multi-block and unstructured CGNS data sets. May you know - CGNS is a general purpose format for CFD data storage and cross system compatibility.

As far I could see, there are some information included also in the CFView manual, but maybe not specific anbough for your question. Numeca is refering to http://www.cgns.org for a complete presentation of the format.

May this will help? Regards,

Stephan
vinayender likes this.
  Reply With Quote

Old   July 23, 2008, 08:14
Default Re: Can CFview reads CGNS ?
  #6
Vinayender
Guest
 
Posts: n/a
Dear Aji,

Thank you very much for your replay. Will it also support if I write the Grid in Cylindrical coordinates ?

Thanks, Vinayender.
  Reply With Quote

Old   July 23, 2008, 08:16
Default Re: Can CFview reads CGNS ?
  #7
Vinayender
Guest
 
Posts: n/a
Dear Aji,

Thank you very much for your replay. Will it also support if I write the Grid in Cylindrical coordinates ?

Thanks, Vinayender.

  Reply With Quote

Old   July 23, 2008, 08:17
Default Re: Can CFview reads CGNS ?
  #8
Vinayender
Guest
 
Posts: n/a
Dear Stephan,

Thank you very much for your replay. I would certainly refer to them.

Thanks, Vinayender.

  Reply With Quote

Old   July 21, 2009, 05:25
Default
  #9
New Member
 
deng qingfeng
Join Date: Jul 2009
Posts: 9
Rep Power: 8
afeng0796 is on a distinguished road
The Tecplot or tec360 will help,and it supports CGNS format
vinayender likes this.
afeng0796 is offline   Reply With Quote

Old   November 27, 2009, 12:50
Default Thank you all
  #10
New Member
 
Vinayender
Join Date: Jul 2009
Location: India
Posts: 24
Rep Power: 8
vinayender is on a distinguished road
Thank you all for your replays !!
My porblem got resolved
__________________
Thanks ,
Vinayender
vinayender is offline   Reply With Quote

Old   March 17, 2011, 08:57
Default
  #11
Member
 
mistry
Join Date: Apr 2009
Location: India
Posts: 69
Rep Power: 8
csmistry is on a distinguished road
Dear Vinayender,
My company is planning to purchase CFD software and for that CFX,StarCD and Numeca we bhave option out of which we want to compare their results with same mesh and boundary conditions can you suggest something how to insert CFX mesh to Numeca?

thanks
csmistry is offline   Reply With Quote

Old   May 10, 2011, 07:32
Lightbulb Numeca mesh
  #12
New Member
 
sanboju
Join Date: Jan 2011
Posts: 14
Rep Power: 6
sanboju is on a distinguished road
Hi,

Try to use hypermesh to convert any CFD file in a Numeca file, and viceversa. I used that program to mesh some structures for Abaqus FEM, Nastran and Ansys but I've just read about the possibility of mesh the environment like any CFD.

If you try to use Numeca IGG environment you'll see that mesh code is very comfortable and the smothing surface option makes a better mesh with a better flow transfer between cells

cheers,
Sanboju
vinayender likes this.
sanboju is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can CFview read CGNS file ? Vinayender Main CFD Forum 0 May 23, 2008 05:28
CFView run on the Suse10.2 system has an erro exergy NUMECA 2 September 26, 2007 05:36
CFView run on the suse10.2 has an erro exergy NUMECA 0 August 18, 2007 22:42
cfview in cascade fishcuter NUMECA 0 February 29, 2004 03:35
cfview fishcuter NUMECA 0 February 29, 2004 03:34


All times are GMT -4. The time now is 03:14.