CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Fidelity CFD

input RPM profile?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 18, 2008, 01:35
Default input RPM profile?
  #1
Lee Sangdo
Guest
 
Posts: n/a
I want to solve unsteady rotor-stator problme. can I input rotor rpm profile like rpm vs time in Fine?
  Reply With Quote

Old   May 7, 2008, 10:57
Default Re: input RPM profile?
  #2
Jin-Kwon KIM
Guest
 
Posts: n/a
Dear Mr.Sangdo Lee,

I am Jin-Kwon KIM, president of EngiSol Co, the Numeca distributor in Korea.

As far as I know, as of today, 2008.5.7., Fine/turbo does not have such function to input rpm profile like rpm vs time, which you asked and which might be used for transient simulation for machine startup or failure.

But Numeca support and development team are very responsive and reliable, and if you have intention of using Numeca solutions at such simulation, I am sure that they can accept your suggestion and support you with such fuctions.

Please email me your contact information, then I will contact you.

Look forward to hearing from and supporting you.

Best Regards,

Jin-Kwon KIM. ---EngiSol.com: ์œ ์ฒด,์-ด๊ณตํ•™ Total Solution --- ์†Œํ"„ํŠธ์›จ์–ด ๊ฐœ๋ฐœ, ํŒ๋งค, ๊ธฐ์ˆ ์ง€์› ๋ฐ ๊ด€๋ จ ๊ธฐ์ˆ ์ปจ์„คํŒ…. CFD(์ „์‚ฐ์œ ๋™ํ•ด์„):

- HEXPRESS, AutoGrid, IGG : ์ž๋™๊ฒฉ์ž ์ƒ์„ฑ

- FINE/Hexa (๋ฒ"์šฉ),

- FINE/Turbo(ํ„ฐ๋ณด๊ธฐ๊ณ„),

- FINE/Marine(์กฐ์„ )

- FINE/design3d (ํ„ฐ๋ณด๊ธฐ๊ณ„ ๋‚ ๊ฐœ ์ตœ์  ์„ค๊ณ„) ๋ฐฐ๊ด€๋ง ์œ ๋™/๊ตฌ์กฐ ํ•ด์„/์„ค๊ณ„

๋ฒ"์šฉ ๋ฐฐ๊ด€๋ง ์œ ๋™ํ•ด์„ : Piping Systems FluidFlow, AFT Fathom, Arrow

๋ฐฐ๊ด€๋ง ์ˆ˜์ถฉ๊ฒฉ, surge ํ•ด์„/์„ค๊ณ„: AFT Impulse

๋ฐฐ๊ด€๋ง ์ตœ์ ์„ค๊ณ„ : AFT Mercury, Titan

์ง€์-*๋‚œ๋ฐฉ ์-ด๋ฐฐ๊ด€๋ง ์œ ๋™/๊ตฌ์กฐ ํ•ด์„/์„ค๊ณ„: Flowra, sisKMR

์ƒ์ˆ˜๋„ ๋ฐฐ๊ด€๋ง ํ•ด์„/์„ค๊ณ„ : H2ONET ์œ ์ฒด๊ธฐ๊ณ„ ์„ค๊ณ„

- ํ„ฐ๋ณด๊ธฐ๊ณ„(ํŽŒํ"„,ํŒฌ,์••์ถ•๊ธฐ,ํ„ฐ๋นˆ)๋‚ ๊ฐœ 3์ฐจ์› ์-*์„ค๊ณ„ SW : TurboDesign/ TurboCfd

- ์›์‹ฌ/์‚ฌ๋ฅ˜ ํŒฌ/์†กํ'๊ธฐ ์„ค๊ณ„ : CFturbo

- FINE/design3d (ํ„ฐ๋ณด๊ธฐ๊ณ„ ๋‚ ๊ฐœ ์ตœ์  ์„ค๊ณ„) --- ๊น€์ง„๊ถŒ, ๊ณตํ•™๋ฐ•์‚ฌ, ๋Œ€ํ'œ, ์-"์ง€์ (EngiSol.com) ๊ฒฝ๊ธฐ ์•ˆ์–' ๋™์•ˆ ํ˜ธ๊ณ„ 555-9๋ฒˆ์ง€ 20๋™108ํ˜ธ(์šฐ.431-763) [์„œ์šธ] ์„œ์šธ ๊ด€์•… ์‹ ๋ฆผ9๋™ ์‚ฐ56-1๋ฒˆ์ง€ 313๋™207ํ˜ธ (์šฐ.151-742) --- Jin-Kwon KIM, Ph.D, president of EngiSol Co. Address: Bldg 20-108, Ho-Gye 555-9, Dong-an, An-yang, Kyung-ki, 431-763, South Korea [Seoul Office]: Bldg 313-207, San 56-1, Shin-lim, Kwan-ak, 151-742, Seoul, Korea. Tel: +82-2-874-6852 Mobile: +82-16-340-6826 Fax: +82-2-889-6205 Email(1st): realdog@paran.com Email(2nd): realdog@snu.ac.kr Email(3rd): jindoc@gmail.com Email(all): realdog@paran.com, realdog@snu.ac.kr, jindoc@gmail.com www.EngiSol.com
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Step input B.C.'s Darin FLUENT 0 February 20, 2007 19:10
Input Linear Temp. Profile Ferdous Rana Main CFD Forum 0 April 24, 2006 17:26
Input file for FDS Sean Main CFD Forum 0 February 27, 2006 22:33
input variable appleyy FLUENT 1 April 24, 2001 10:17
KIVA input Olmi Main CFD Forum 0 September 25, 1998 12:04


All times are GMT -4. The time now is 00:42.