CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   NUMECA (http://www.cfd-online.com/Forums/numeca/)
-   -   discontinuity of 180 in leading edge(NUMECA autogrid) (http://www.cfd-online.com/Forums/numeca/65730-discontinuity-180-leading-edge-numeca-autogrid.html)

johncarouche June 24, 2009 09:31

discontinuity of 180 in leading edge(NUMECA autogrid)
 
Hi!
I'm a new user of NUMECA and I have a problem when I try to link my leading edge.
An error message appears : " discontinuity of 180 in leading edge"
If someone knows something that could help me, I would be most grateful.
I really don't understand what this message means.

Hamidzoka December 12, 2009 03:05

dear Johncarouche
if you use ".Geomturbo" format files to import your geometry model this error may be caused by wrong definition of blade sections. check your geometry. note that in both pressure and suction sides section points should be placed in the right order. e.i. from LE to TE.


All times are GMT -4. The time now is 20:44.