CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

discontinuity of 180 in leading edge(NUMECA autogrid)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 24, 2009, 09:31
Unhappy discontinuity of 180 in leading edge(NUMECA autogrid)
  #1
New Member
 
Join Date: Jun 2009
Posts: 2
Rep Power: 0
johncarouche is on a distinguished road
Hi!
I'm a new user of NUMECA and I have a problem when I try to link my leading edge.
An error message appears : " discontinuity of 180 in leading edge"
If someone knows something that could help me, I would be most grateful.
I really don't understand what this message means.
johncarouche is offline   Reply With Quote

Old   December 12, 2009, 03:05
Default
  #2
Senior Member
 
Hamid Zoka
Join Date: Nov 2009
Posts: 164
Rep Power: 8
Hamidzoka is on a distinguished road
dear Johncarouche
if you use ".Geomturbo" format files to import your geometry model this error may be caused by wrong definition of blade sections. check your geometry. note that in both pressure and suction sides section points should be placed in the right order. e.i. from LE to TE.
Hamidzoka is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Autogrid: discontinuity of 90 degrees in shroud Eric Joubarne NUMECA 1 July 21, 2009 04:34


All times are GMT -4. The time now is 14:20.