CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   NUMECA (http://www.cfd-online.com/Forums/numeca/)
-   -   problem with translation (http://www.cfd-online.com/Forums/numeca/65964-problem-translation.html)

johncarouche July 2, 2009 04:52

problem with translation
 
Hi!
I have a file X_T( parasolid) to define my blade. The trouble is that it is located too close from r=0. As a consequence, the curve of the hub cuts r=0.
So, I have to make a translation.
I translate the hub, the shroud and the blade. When I try to link the blade which has been translated, it didn't match with the hub and the shroud in the meridional view.
I don' understand because I apply the same translation to the blade , the shroud and the hub.
any idea?

afeng0796 July 21, 2009 04:59

use the "bulb" Button,and use the bulb function


All times are GMT -4. The time now is 03:49.