AutoBlade and AutoGrid Tutorials

usman · July 25, 2009, 08:40

Hi,
From where can i get Numeca AutoBlade and AutoGrid Tutorials. Is it possible to make turbo volumes in AutoBlade.
Thank you.

emraisel · December 16, 2009, 18:04

Quote:

Originally Posted by usman

Hi,
From where can i get Numeca AutoBlade and AutoGrid Tutorials. Is it possible to make turbo volumes in AutoBlade.
Thank you.

If you contact with me, then I can supply them to you..

Regards,

selcukatalay@hotmail.com

Hamidzoka · March 15, 2010, 06:51

i can introduce two useful sites.
first www.numeca-beijing.com which is a branch of numeca in asia and second www.cadfamily.com/downlist which includes more than 100 pdf files about different modules of numeca.

regards

Hamidzoka · March 15, 2010, 07:02

Autoblade is a tool to define turbo blades and hub and shroud curves. different types of compressor, turbine and fan blades can be drawn. once you have specified 2-d sections of your blade(i.e. you have designed some 2-d sections using either analytic or inverse methods) and shroud and hub curves, you can define it completely. its output file will be a"geomturbo" format which is an input file for Autogrid to produce control volumes and meshes.

July 25, 2009, 08:40	AutoBlade and AutoGrid Tutorials	#1
usman Member Muhammad Usman Qureshi Join Date: Mar 2009 Posts: 40 Rep Power: 6	Hi, From where can i get Numeca AutoBlade and AutoGrid Tutorials. Is it possible to make turbo volumes in AutoBlade. Thank you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AUTOGRID and AUTOBLADE strengths and limitations	Haider	NUMECA	1	December 6, 2007 20:24

March 15, 2010, 06:51		#3
Hamidzoka Senior Member Hamid Zoka Join Date: Nov 2009 Posts: 118 Rep Power: 5	i can introduce two useful sites. first www.numeca-beijing.com which is a branch of numeca in asia and second www.cadfamily.com/downlist which includes more than 100 pdf files about different modules of numeca. regards

March 15, 2010, 07:02		#4
Hamidzoka Senior Member Hamid Zoka Join Date: Nov 2009 Posts: 118 Rep Power: 5	Autoblade is a tool to define turbo blades and hub and shroud curves. different types of compressor, turbine and fan blades can be drawn. once you have specified 2-d sections of your blade(i.e. you have designed some 2-d sections using either analytic or inverse methods) and shroud and hub curves, you can define it completely. its output file will be a"geomturbo" format which is an input file for Autogrid to produce control volumes and meshes.