CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   NUMECA (http://www.cfd-online.com/Forums/numeca/)
-   -   Import CFXTurbogrid(*.gtm) file to NUMECA (http://www.cfd-online.com/Forums/numeca/84777-import-cfxturbogrid-gtm-file-numeca.html)

csmistry February 8, 2011 12:46

Import CFXTurbogrid(*.gtm) file to NUMECA
 
Can CFX turbogrid mesh (*.gtm) be import to numeca file for solver ?

In what format *.gtm needs to be saved for the same?

Hamidzoka February 17, 2011 04:46

Dear csmistry;
Numeca can not import *.gtm meshes directly.
Numeca unstructured grid generator can recieve Ansys hexaderal mesh. and its strctured multi block mesh generator package can accepts *.CGNS mesh files.

regards

csmistry March 4, 2011 11:54

Sir,
If i want to do comparison of their performance and result then what to do?
Can you suggest any other way to import .gtm file to numeca?
I heard that if i input .gtm to ICEMCFD and from there if i save.igg file then will it work?

Please reply me

Hamidzoka March 5, 2011 04:10

Dear csmistry;As far as i know, ICEMCFD does not export meshes to .igg format.you may build a new mesh in numeca for validation.regards

csmistry March 9, 2011 10:09

Sir, can we insert *.cgns to Numeca?
i made it from ICEM CFD but what to do next is not known to me for solving a problem in numeca...
please do guide me

Hamidzoka March 12, 2011 02:57

I think you had better to import your blade geometry in ".geomturbo" format. Numeca autogrid module can easily generate a multi-block structured mesh around your model.
according to its unique style of meshing, it wont accept other mesh files formats such as CGNS.

regards


All times are GMT -4. The time now is 15:26.