Error loading results

Martin_D · September 12, 2011, 04:44

Hello to everyone. I have problem with Numeca when it comes to reading results. The error warning is as follows: IO Error in FileOpenProject: Input error in ''filename.run'': Mesh base not found : cgns file do not contain expected data.

Can anyone help me with this problem?
Thank you

Martin_D · September 15, 2011, 02:43

Just in case anyone is wondering how to fix this problem: Disabling ''Coarse Grid Initialization'' solves the problem.

DarylMusashi · December 30, 2016, 21:13

This warning message appears when you want to open a solution file and it doesn't exist, yet. You don't have to deactivate the coarse grid initialization, but only wait for the first output to be written by the solver.

September 12, 2011, 04:44	Error loading results	#1
Martin_D New Member Martin Join Date: Jul 2010 Posts: 20 Rep Power: 15	Hello to everyone. I have problem with Numeca when it comes to reading results. The error warning is as follows: IO Error in FileOpenProject: Input error in ''filename.run'': Mesh base not found : cgns file do not contain expected data. Can anyone help me with this problem? Thank you

December 30, 2016, 21:13		#3
DarylMusashi Senior Member Holger Dietrich Join Date: Apr 2011 Location: Germany Posts: 174 Rep Power: 14	This warning message appears when you want to open a solution file and it doesn't exist, yet. You don't have to deactivate the coarse grid initialization, but only wait for the first output to be written by the solver. colinda1 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM - Validation of Results	Ahmed	OpenFOAM Running, Solving & CFD	10	May 13, 2018 18:28
Different Results from Fluent 5.5 and Fluent 6.0	Rajeev Kumar Singh	FLUENT	6	December 19, 2010 11:33
validation of CFD results	andy	FLUENT	0	June 13, 2007 13:55
Problems with repeating results	Lee	Siemens	4	May 26, 2006 03:39
benchmark results	stefan	Siemens	3	September 10, 2001 09:48

September 15, 2011, 02:43		#2
Martin_D New Member Martin Join Date: Jul 2010 Posts: 20 Rep Power: 15	Just in case anyone is wondering how to fix this problem: Disabling ''Coarse Grid Initialization'' solves the problem.