Residual is Not A Number

kavia_84 · September 23, 2011, 04:51

I appreciate if anyone from NUMECA would answer my question.

I've tried running analysis but i've got error where it says,

SteadySolverOutput::displayResidual-->ERROR: one of the residual is Not A Number: the solver is stopped

Appreciate if you could help me with this.
thank you..

Rgds

Nick

dfdq16 · October 21, 2011, 08:00

hi nick,

have you solved the problem? i habe the same one with you....

rgds

Stuttheier

Hamidzoka · October 25, 2011, 06:38

Dear Kavia;
this is divergence.
check your boundary and initial conditions.it seems that something unrealistic happens within the fluid domain.

September 23, 2011, 04:51	Residual is Not A Number	#1
kavia_84 New Member Join Date: Sep 2011 Posts: 1 Rep Power: 0	I appreciate if anyone from NUMECA would answer my question. I've tried running analysis but i've got error where it says, SteadySolverOutput::displayResidual-->ERROR: one of the residual is Not A Number: the solver is stopped Appreciate if you could help me with this. thank you.. Rgds Nick

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
alphaEqn.H in twoPhaseEulerFoam	cheng1988sjtu	OpenFOAM Bugs	14	September 18, 2011 13:46
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3	bookie56	OpenFOAM Installation	8	August 13, 2011 04:03
problem with Min/max rho	tH3f0rC3	OpenFOAM	5	May 3, 2011 07:44
MRFSimpleFOAM goes divergenced!	renyun0511	OpenFOAM Running, Solving & CFD	0	November 19, 2009 02:11
Modeling in micron scale using icoFoam	m9819348	OpenFOAM Running, Solving & CFD	7	October 27, 2007 00:36

October 21, 2011, 08:00		#2
dfdq16 New Member Join Date: Oct 2011 Posts: 1 Rep Power: 0	hi nick, have you solved the problem? i habe the same one with you.... rgds Stuttheier

October 25, 2011, 06:38		#3
Hamidzoka Member Hamid Zoka Join Date: Nov 2009 Posts: 87 Rep Power: 4	Dear Kavia; this is divergence. check your boundary and initial conditions.it seems that something unrealistic happens within the fluid domain.