CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > NUMECA

Autoblade centrifugal pump template

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 4, 2011, 07:56
Default Autoblade centrifugal pump template
  #1
New Member
 
Mahdi Balali
Join Date: Oct 2011
Posts: 5
Rep Power: 5
mahdi balali is on a distinguished road
Hi everybody
I am working on a sample pump design and optimization process as follows:

1- The geometry is completed in CFTurbo
2- The mesh is generated in Autogrid
3- The analysis has been completed in Fine/Turbo
4- The model is transferred to Fine/Design 3D to start the optimization process.
5- Now I must create the parametric model in Autoblade, but when I switch to
Autoblade I cannot find any template for centrifugal pump. the menu
contains the following items, but there is no centrifugal pump:
-none
-axial compressor
-axial turbine
-centrifugal compressor
-centrifugal compressor with spliter
-radial diffuser
-wind turbine
-flank milled compressor
-axial fan

as you see there is no centrifugal pump, I dont know if I am proceeding wrong, or if I had to add a template file for centrifugal pump.
please kindly advise, and if you have the file let me use it.
Thanks in advance from all of the friends.
mahdi balali is offline   Reply With Quote

Old   October 7, 2011, 21:50
Default
  #2
Member
 
CJ
Join Date: Apr 2010
Location: Malaysia
Posts: 69
Rep Power: 6
oldshoes81 is on a distinguished road
Send a message via MSN to oldshoes81 Send a message via Skype™ to oldshoes81
Hi,

Could you try on the centrifugal compressor for fitting purpose?
__________________
Regards
CJ
NUMIT Enterprise, Malaysia
+6 017 656 3436
http://maccom-numit.blogspot.com
http://www.numit.com.my
Email : seiko.q@numit.com.my
oldshoes81 is offline   Reply With Quote

Old   October 8, 2011, 03:27
Default
  #3
New Member
 
Mahdi Balali
Join Date: Oct 2011
Posts: 5
Rep Power: 5
mahdi balali is on a distinguished road
Quote:
Originally Posted by oldshoes81 View Post
Hi,

Could you try on the centrifugal compressor for fitting purpose?

Maybe,
but I am looking for any template that is designed specially for centrifugal pumps.
Do you any available file on the web?
mahdi balali is offline   Reply With Quote

Old   February 18, 2014, 08:56
Default
  #4
Member
 
Arslan
Join Date: Jan 2011
Posts: 35
Rep Power: 5
ArslanOZCAN is on a distinguished road
Hi;

It's been a long time but could you find a solution for this problem ?
ArslanOZCAN is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
release of the ERCOFTAC centrifugal pump - Fourth OpenFOAM Workshop olivier OpenFOAM 5 June 26, 2014 11:10
[GAMBIT] influence between angle in impeller blade and centrifugal pump performance barak182 ANSYS Meshing & Geometry 2 August 18, 2010 03:07
Centrifugal Pump and Turbulence Model Michiel CFX 12 January 25, 2010 03:20
centrifugal pump and centrifugal fan Mangesh Main CFD Forum 3 January 3, 2006 11:21
stator-rotor interaction in the centrifugal pump G.H.Lee Main CFD Forum 4 May 25, 1999 07:33


All times are GMT -4. The time now is 14:52.